USING YOUR COOKTOP
b a
Burner indicator 
1Identify the dial of the burner you want to use.
3After the burner has lit, adjust the flame anywhere between HI and LO.
●Do not adjust or leave the dial between HI and OFF.
2Press down (a) then turn
●The halo will glow red. The halo’s of the other burners will glow white.
●The ignitors will start clicking as they spark.
●If there is no clicking, there is no spark to light the burner. If the burner fails to light turn the dial back to OFF and see ‘Troubleshooting’.
4When you have finished cooking, turn the dial clockwise back to OFF.
●The halo will turn white, or if all the other dials are in the OFF position, all the halos will go out.
●Check that the burner has gone out.
●Before leaving the kitchen, check that all burners have been turned off (all of the halos have gone out).
6
