24
Care and cleaning
Burners and pan supports
You can remove and clean these parts with hot soapy water or other appropriate products - see ‘Cleaning chart’.
After cleaning, check that the burners and their flame spreaders are dry before replacing correctly.
It is very important to check that the burner flame spreader and the cap have been correctly positioned. Failure to do so can cause serious problems.
Note: To avoid damage to the electric ignition do not try to light the cooktop when the burners are not in place.
Replacing the burners
It is very important to check that the burner flame spreader “F” and the cap “C” have been correctly positioned (see fig. 9).
Failure to do so can cause serious problems.
Check that the ignitor S (figs. 9 and 11) is always clean to ensure
In the models with the flame failure safety device, check that the probe T (figs. 9 and 11) next to each burner is always clean to ensure correct operation of the safety valves.
Both the ignitor (S) and probe (T) must be very carefully cleaned using a toothbrush and methylated spirits.
C
F
T *
S
Fig. 9 Correct | Fig. 10 Replacing the burner cap |
* Models with flame failure device only