6
Installation instructions
This cooktop has been designed and constructed in accordance with the following codes and specifications:
AGA101 (AS 4551) Approval Requirements for Domestic Gas cooking appliances
AS/NZS
AS/NSZ
AS/NSZ 1044 Electromagnetic Compatibility Requirements.
The installation shall comply with the dimensions in Figures 1 and 2, bearing in mind that: A minimum clearance of 20 mm has to be kept between the bottom of the cooking hob and the top of an appliance or a shelf. To ensure this clearance mount the spacers, supplied with the appliance, as shown in the figure 3.
Overhead clearances - In no case shall the clearance between the highest part of the hob and a range hood be less than 600 mm, or for an overhead exhaust fan, 750 mm. Any other downward facing combustible surface less than 600 mm above the highest part of the hob shall be protected for the full width and depth of the cooking surface area in accordance with local regulations in force. However, in no case shall this clearance to any surface be less than 450 mm.
Side clearances - Where the dimension from the periphery of the nearest burner to any vertical combustible surface is less than 200 mm, the surface shall be protected in accordance with with local regulations in force to a height of not less than 150 mm above the hob for the full dimension (width or depth) of the cooking surface area.
Where the dimensions from the periphery of the nearest burner to any vertical combustible surface is less than 200 mm, the horizontal surface shall be greater than 10 mm below the surface of the hob, or the horizontal surface requirement above.
Protection of combustible surfaces - Local regulations in force specify that where required protection shall ensure that the surface temperature of the combustible surface does not exceed 65 °C above ambient. The fixing of 5 mm thick ceramic tiles to the surface or attaching fire resistant material to the surface and covering with sheet metal with minimum thickness of 0.4 mm should be satisfactory.
|
| 500 | |
| 200 |
|
|
Fig. 1 | 560 | – | 0 |
| 2 | ||
|
|
580
34
0 2 – 480
60
Cooktop dimensions
Width | 580 mm |
|
|
Depth | 500 mm |
|
|
Depth below mounting surface | 34 mm |
|
|
Cut-out dimensions
Width | 560 mm | 0 |
– 2 | ||
|
|
|
Depth | 480 mm | 0 |
– 2 | ||
|
|
|