Installation instructions
Fastening the cooktop to the bench
11
1Turn the cooktop upside down and place it on a soft surface.
2Spread the seal around the edges, with the adhesive side facing down.
3Mount the supplied front and rear clamps (F and R) and screws (S) onto the cooktop, as shown (without tightening the screws).
4Place the cooktop into the cutout, then tighten the screws to clamp the cooktop securely to the bench.
5Using a sharp cutter or trimmer knife, trim the excess sealing material around the edge of the cooktop. Take care not to damage the benchtop.
Note: if your bench is thicker than 40 mm, recess the underside to between 30 and 40 mm.
|
| R | S |
R | REAR |
|
|
| S |
| S F |
|
|
| |
| S | F |
|
|
|
| FRONT |
| Adhesive side |
| Seal |
|
|
|
Fig. 3 Preparing the cooktop before installation
| REAR CLAMPS |
|
|
|
40 mm | 30 mm |
| A |
|
| R | S | 30 mm | min |
|
| FRONT CLAMPS |
| |
|
| A | 30 mm | 40 mm |
30 mm | min | S | F |
|
|
|
| ||
Fig. 4 Fastening the cooktop to the bench
