Care and cleaning
Cleaning the drain filter, spray arm and filter plate
25
We recommend that the drain filter is cleaned | a | |
whenever there is evidence of food particles. | ||
| ||
The spray arm and filter plate may need cleaning |
| |
about once a month in normal use or more often |
| |
should the need arise. |
| |
If a dishwasher cleaner/descaler is used, you | b | |
must run a wash programme with detergent | ||
| ||
immediately afterward to prevent any damage to | c | |
your DishDrawer®. |
| |
| Internal parts of the DishDrawer® : | |
Important ! | a Spray arm | |
b Filter plate | ||
The DishDrawer® must be used with the filter plate, | c Drain filter | |
drain filter and spray arm correctly in place. |
|
Cleaning the drain filter
1Unplug the DishDrawer® or turn it off at the power supply (wall switch).
2 Lift up the drain filter access panel on the base rack (if fitted).
3 Lift and remove the drain filter.
4 Empty, rinse clean under running water and replace back into the allocated space. 5 Ensure the drain filter is flush with the filter plate.
6 Plug the DishDrawer® back in or turn it on at the power supply (wall switch).