30
Fault codes
Fault codes |
| Possible causes | What to do | ||
F1 |
|
| Flood switch has been | Turn the water and power supply to the | |
|
| ||||
|
|
|
| activated. | DishDrawer® off and call your Authorised |
|
|
|
| ||
|
|
|
|
| Service Centre or Customer Care. |
F2
Motor problem. | Call your Authorised Service Centre or |
| Customer Care. |
F3
Temperature sensor | Ensure water coming in through the inlet |
failed. | hose is less than 65 oC. You may need to |
| install a tempering valve on your water |
| supply. |
F4
F5
F6
F7
F8
F9
Faulty temperature | Call your Authorised Service Centre or |
sensor or element. | Customer Care. |
Lid fault. | 1 Turn power supply to DishDrawer® off, |
| then turn on power supply. Fault may |
| reset. |
| 2 Call your Authorised Service Centre or |
| Customer Care. |
Lid fault. | 1 Turn power supply to DishDrawer® off, |
| then turn on power supply. Fault may |
| reset. |
| 2 Call your Authorised Service Centre or |
| Customer Care. |
Lid fault. | Call your Authorised Service Centre or |
| Customer Care. |
Electrical problem. 1 Turn power supply to DishDrawer® off. 2 Call your Authorised Service Centre or
Customer Care.
Electronics | Call your Authorised Service Centre or |
malfunction. | Customer Care. |
