6.11Tub Removal

6.11.1Remove the drawer front as per instructions in 6.1.

6.11.2Remove the wiring cover as per instructions in 6.8.

6.11.3Disconnect the fill hose from the dispenser (water may drip)

6.11.4Disconnect the mains harness and chassis harness connectors from the electronic controller.

6.11.5Unclip the drain hose cuff from the motor assembly.

6.11.6From the under side of the tub now unclip the drain hose, fill hose and the wiring looms which go to the link assembly. Disconnect the earth wire off the element plate.

6.11.7The link assembly can now be unhooked from the rear of the tub by pressing the spigots back through the tub connection point.

6.11.8The tub may now be lifted at the front and slipped forward off the slide runners.

6.11.9Refit in reverse manner.

6.12Locking Ring, Element Plate and Motor Assembly Removal

6.12.1Remove the drawer front, tub, filter plate and rotor assembly as per instructions in 6.1,6.9, 6.10 & 6.11.

6.12.2Disconnect the wiring connectors off the heater plate and motor (mark motor wire location). To release the motor connections push a fine blade screwdriver down alongside the wiring connection to release the locking barb on the terminal.

6.12.3Disconnect the rotor position sensor from the motor housing.

6.12.4While lifting the tab on the locking ring, rotate the ring anticlockwise until it comes free of tub tabs.

6.12.5This also releases the motor housing from the locking ring.

6.12.6Holding the pump housing on the motor assembly lift the locking ring, heating plate and motor clear of the tub.

6.12.7The suction pipe of the drain molding will slide out of the tub drain area.

6.12.8You may now lift the locking ring clear of the motor assembly. This will allow the heater plate and motor assembly to come apart

6.12.9Be careful of the two ‘O’rings which seal between the motor assembly and heater plate and the heater plate and tub, these and the tub sealing area must be clean and put in the correct place before reassembly takes place.

6.12.10Check both the drain cuff ‘O’ring and suction pipe ‘O’ring for deformation and damage. Lubricate and if necessary replace ‘O’rings

before reassembly.6.12.11 Reassemble in reverse manner ensuring all locking ring tabs are engaged.

- 37 -

Page 39 Page 41
Page 40
Image 40
Fisher & Paykel DD601IV2, DS601V2, DS601IV2, DD601V2 Tub Removal, Locking Ring, Element Plate and Motor Assembly Removal
Page 39 Page 41

DD601V2, DS601IV2, DS601V2, DD601IV2 specifications

The Fisher & Paykel DD601IV2, DS601V2, DS601IV2, and DD601V2 are premium dishdrawer dishwashers embodying innovation and versatility in kitchen appliances. Designed with user convenience and functionality in mind, these models redefine the experience of dishwashing.

The DD601IV2 is an integrated model that seamlessly blends into your cabinetry, offering a sleek, modern look. With its compact design, it fits easily into smaller spaces while still providing ample capacity. The unique double-drawer design allows users to operate each drawer independently, presenting the option to wash different load types concurrently. This feature is especially beneficial for households with varying dishwashing needs, from everyday dinnerware to delicate glassware.

The DS601V2 offers a beautifully designed stainless steel exterior, making it an eye-catching addition to any kitchen. This model includes advanced wash programs, such as the Eco option for energy-efficient cleaning and the Heavy-duty option for tough, baked-on messes. Users can select from a variety of wash cycles to suit their specific requirements, ensuring every load comes out impeccably clean.

One of the standout technologies across these models is SmartDrive™ technology, which features a brushless DC motor. This innovation not only promotes quiet operation but also enhances the overall cleaning efficiency. The intelligent design adjusts the wash action based on the load size and type, maximizing water and energy use while providing a thorough clean.

The innovative rinse aid dispenser ensures that dishes come out sparkling, while the easy-to-use control panel allows for straightforward operation. Other notable features include adjustable racking systems, which can be modified to accommodate a variety of dish sizes and shapes, and an energy-efficient design that meets strict energy-saving criteria without compromising performance.

Safety is also a paramount consideration in these models. They incorporate features such as FloodSafe™ technology, which offers peace of mind by preventing leaks, and the Child Lock option, ensuring safe operation in homes with young children.

In summary, Fisher & Paykel’s dishdrawer dishwashers are characterized by their adaptability, advanced technologies, and modern aesthetics. With options suitable for both integrated and standalone setups, they cater to the dynamic needs of today’s kitchens, making them an exceptional choice for anyone seeking efficiency and style in their dishwashing experience.
Top Page Image Contents