RCA ANT3037X installation manual Front Assembly

Slide the crimped end of the front assembly boom into the open end of the back assembly boom (Figure 4). Re-insert the screw into the plastic block closest to the mast clamp, and secure with the flange nut.

Front Assembly	Screw	Back Assembly
Crimped End			Mast
	Insertion
	Site	Clamp

Figure 4

Then, slip the phasing lines onto the threaded rivets near the reflector brackets. Add a washer onto each rivet. Thread a small nut onto each rivet. See Figure 5.

Top View Side View

Reflector Bracket

Rivet

Phasing

LinesPhasing

Lines

Figure 5

Unfold the elements on the two corner reflectors as in Figure 6. You should hear the pieces click into place.

Before After

Corner Reflector

Figure 6

ENGLISH

5