RCA ANT3037X Adding the Low Band VHF Add-On Kit, For RF Channels 2-6 and/or FM, English

If you determined that you need the Low Band VHF Add-On Kit, proceed with the steps on the next page. If you determined that you do not need the Low Band VHF Add-On Kit (page 2), continue with attaching the coax cable on page 9.

Adding the Low Band VHF Add-On Kit

For RF Channels 2–6 and/or FM

If unsure whether or not to install the Low Band VHF Add-On Kit, see the section “Do I Need to Install the Low Band VHF Kit?” on page 3.

Locate the hole in the bottom of the boom near the mast clamp.

Mast Clamp

Figure 10

Hole

ENGLISH

7