(1,1)
6ROUTE THE HOSES AND MOVE INTO THE CAVITY
A | A |
OR
2
Tie together to avoid kinking. | 1 |
B | If top mounting brackets are being | Ensure hoses and cord | |
2 | used, ensure they’re securely fitted | ||
are not kinked or twisted. | |||
before sliding product into cavity. | |||
|
|
optional
(x2)
| 3 |
Loosen feet only and | 3 |
take care when pushing | 1 |
the product into the |
|
cavity that you do not |
|
bend the feet. |
|
1
7REMOVE THE DRAWER AND LEVEL THE PRODUCT
A | 4 |
1 |
B
Ensure product is level and aligning with cabinetry. Using the most appropriate length Hexagonal socket supplied, fully extend levelling feet up to required distance by hand.
2
5 
”
150( mm)
30 mm
Ensure the drawer is removed and then rotated
to prevent kinked hoses.
5
Hexagonal socket
1 | 2 | 4 | 3 |
|
|
| |
|
| 5 |
|
3 | 5 |
|
x 4
