Read this before you start installing your dryer
This is the safety alert symbol. This symbol alerts you to hazards that can kill or hurt you and others. The safety alert symbol and the word DANGER or WARNING will precede all safety messages. These words mean:
DANGER 
WARNING
You can be killed or seriously injured if you don’t immediately follow instructions.
You can be killed or seriously injured if you don’t follow instructions.
All safety messages will identify the hazard, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.
Check to make sure you have all the tools and parts necessary to correctly install this appliance.
Tools required
1⁄4’’ nut driver or socket wrench
Phillips screwdriver
Adjustable wrench that opens to 1’’ or 1’’
Adjustable wrench 8” or 10” (20cm or 25cm) for gas connections
Level
Pipe joint compound (pipe dope or tape) for gas pipe connections that is resistant to LP Propane, Butane and Natural Gas
Caulking gun and compound (for installing new exhaust vent)
Gloves
Safety glasses
Knife
Duct tape
Parts supplied
2 feet inserts
A power supply cord is supplied already connected to the gas dryer
Check to make sure all parts have been supplied.
Accessories
Natural Gas to LP Conversion Kit Part No 395489
LP to Natural Gas Conversion Kit Part No 395490
Mobile Home Installation Kit Part No 395488
Drying Rack Part No 395332P
Parts needed
Check with local codes and read electrical, gas and venting requirements before purchasing parts.
4
