If a dishwasher cleaner/descaler is used, you must run a wash program with detergent immediately afterward to prevent any damage
to the 
.
Spray Arm
Filter Plate
Drain Filter
Internal Parts of the 
Cleaning the Drain Filter, Spray Arm and Filter Plate
We recommend the drain filter to be cleaned whenever there is evidence of food particles. The filter plate is designed to be self cleaning, but food scraps may accumulate. The spray arm and filter plate may need cleaning about once a month in normal use or more often, should the need arise.
Cleaning the Filter Plate
1.Ensure the 
is cool before you start cleaning and follow the instructions for removing the drain filter and spray arm.
2.In the center of the filter plate, there are two rings. Hold the center ring still and turn the outer ring
3.When cleaning the underside of the filter plate, care must be taken on the sharp outer edge to avoid the risk of cut type injuries.
4.Remove any soil, wash in hot soapy water and rinse thoroughly in clean water. The heater plate can be wiped with a damp cloth.
5.Replace the filter plate so it lies flat in the base of the
ensuring the filter plate is fully locked into position with the center ring.
6.To lock the filter plate into position, ensure the lines align with each other (refer to the diagram for the correct position). The filter plate must not be able to move about freely.
Cleaning the Drain Filter
1.Lift up the drain filter access panel, if fitted on the basket.
2.Lift and remove the drain filter
out of the 
.
3.Empty, rinse under clean running water and replace back into the allocated space.
4.Ensure the drain filter is flush with the filter plate.
Cleaning the Spray Arm
1.Remove the basket carefully. Lift from the back end first so that you do not knock the detergent and rinse agent dispenser.
2.Lift the spray arm and shake any foreign material out.
3.Rinse the spray arm under water and wipe the spray arm with a damp cloth.
4.Replace the spray arm back onto the impeller.
Correct Locking Position of
Filter Plate with Motor
Assembly
Impeller
Center Ring
Outer Ring
WARNING
The | must be used with the filter plate, drain |
filter and spray arm correctly in place.
21
