12
Troubleshooting
Troubleshooting chart
Problem | Cause | What to do |
“A “ flashing alternately | The aluminium mesh filter needs | Clean the aluminium mesh filter |
with the fan speed | cleaning (automatic | following the instructions in |
setting. | alert). | ‘Care and cleaning’. |
“C” flashing alternately | The carbon filter needs | Replace the carbon filter |
with the fan speed | replacing (automatic | following the instructions in |
setting. | alert). | ‘Care and cleaning’. |
“A” or “C” flashing alternately with the fan speed setting, with the fan speed setting flashing twice.
The filter(s) need cleaning/ replacing and the timer is activated.
First deactivate the timer; see the section ‘Using the timer’. Then see the problems above.
“8” flashing in display | The VentSurface has | Return to manual mode. |
when the VentSurface is | detected an error in the | The VentSurface can still |
in automatic mode. | automatic sensor. | be used in manual mode. |
|
|
|
The lamp cover will not | The lamp cover is jammed. | Try jiggling the lamp cover |
fall out when rotated |
| sideways. If the problem |
clockwise. |
| persists, call your Authorised |
|
| Service Centre or Customer |
|
| Care. |
|
|
|