Fisher & Paykel OB24SDPX cleaning and maintenance, General Recomendation, Enamelled Parts

Models: OB24SDPX

1 56
Download 56 pages 4.04 Kb
Page 21
Image 21
cleaning and maintenance

cleaning and maintenance

4

 

 

D

 

 

 

GENERAL RECOMENDATION

Important: Before any operation of cleaning and maintenance disconnect the appliance from the electrical supply.

It is advisable to clean when the appliance when it is cold and especially for cleaning the enamelled parts.

Avoid leaving alkaline or acidic substances (lemon juice, vinegar, etc.) on the sur- faces.

Avoid using cleaning products with a chlorine or acidic base.

The oven must always be cleaned after every use, using suitable products and keep- ing in mind that its operation for 30 minutes on the highest temperature eliminates most grime reducing it to ashes.

ENAMELLED PARTS

All enamelled parts must be cleaned with a sponge and soapy water only or other non-abrasive products.

Dry preferably with a chamois leather.

WARNING

VERY IMPORTANT

Before any operation of maintenance disconnect the appliance from the electrical main supply.

PAINTED PARTS AND SILK-SCREEN PRINTED SURFACES

Clean using an appropriate product. Always dry thoroughly.

IMPORTANT: these parts must be cleaned very carefully to avoid scratching and abra- sion. You are advised to use a soft cloth and neutral soap.

STAINLESS STEEL ELEMENTS

Stainless steel parts must be rinsed with water and dried with a soft and clean cloth or with a chamois leather.

For difficult dirt, use a specific non-abrasive product available commercially or a little hot vinegar.

INSIDE OF OVEN

This must be cleaned regularly.

With the oven warm, wipe the inside walls with a cloth soaked in very hot soapy water or another suitable product.

21

Page 21
Image 21
Fisher & Paykel OB24SDPX cleaning and maintenance, General Recomendation, Enamelled Parts, Stainless Steel Elements