5 |
| installation to the cabinet | |
5 |
|
|
|
|
|
|
|
| GENERAL INFORMATION |
B
A
Fig. 5.1
The oven can be fitted in standard units, minimum width and depth 23" 5/8 (600 mm). Installation requires a compartment as illustrated in figures 5.1 and 5.2.
On the lover side, the oven must lay on supports withstanding the oven weight.
The oven should then be secured by 4 screws fitted into the holes provided at the sides of the oven (Fig. 5.3). If you open the oven door, you will see some screw holes. Remember the housing should not be free standing but be secured to the wall and/or adjacent fittings.
| NOTE |
|
|
H | It is essential that when installing your oven, adequate | ||
| air circulation is available within the installation. | ||
| Inadequate air circulation may greatly impair the | ||
| performance of your oven and may affect adjacent | ||
| cabinets due to an increase in temperature. | ||
| Adjust the hinges of cabinet door adjacent to the oven | ||
| to allow a 5 - 7 mm gap between the furniture door | ||
| and the oven frame. |
| |
F |
|
|
|
C | Ref. | inches | mm |
| |||
G | A | 24" | 609.5 |
| B | 24" | 608.7 |
| C | 21" 7/8 max | 556 max |
| D | 22" 3/64 max | 560 max |
| E | 15/16" | 24 |
| F | 22" 3/64 | 560 |
| G | 23" 1/32 | 585 |
D | H | 1" 31/32 | 50 |
| I | 23" 17/64 | 591 |
E | L | 22" 7/16 min | 570 min |
F
C
B
A
Fig. 5.2
I
L
D
E
24