Fisher & Paykel OB60S9DE installation instructions Care and cleaning, Drop-downgrill element

Care and cleaning

27

Removing and refitting the side racks and catalytic panels

Use a flat-head screwdriver or a small coin to loosen the fixing screws. When refitting the side racks, make sure that they are the right way up, as in the illustrations, and that you tighten the fixing screws.

When refitting the side catalytic panels, make sure that:

- the arrows are pointing upwards - the panel with the hole is on the left oven wall.

Note: the back of the oven is also a catalytic panel, but this is not reversible and should not be removed.

Fig. 6 Removing the side racks

Drop-down grill element

To lower the grill element: use a flat-head screwdriver or a small coin to loosen the element fixing screw.

When you have finished cleaning the oven ceiling, raise the grill element and screw the element fixing screw back onto the stud. Make sure that the fixing screw is tightened and the element is held securely in place.

The grill element itself is self-cleaning.

Fixing screw Stud

Fig. 7 Lowering the grill element