Warnings & safety information
WARNING
Cut Hazard
Take care - panel edges are sharp.
Failure to use caution could result in minor injury or cuts.
WARNING
Before you start
Make sure that the oven is located away from any strong and/or hot drafts of air.
The cabinet opening dimensions specified are the absolute minimum. These dimensions allow a clearance of up to 1/4” (6mm).
The product must be electrically grounded. See “Electrical Connection” for details.
We recommend that the electrical supply junction box is located either 3’’ below the main support surface of the product on the right hand side or flush mounted in the rear wall behind the product or mounted in the adjacent
OS302 OD302
420lb
190 kg
238lb
108 kg
Very Heavy
Do not attempt to lift this product unassisted.
Lifting unassisted may cause serious injury.
diameter hole should be drilled in the right rear corner of the oven cabinet or in the rear of the
The oven support surface should be flat, level and be able to support a weight of at least 420 pounds (190 Kg) for a double oven
CAUTION!
In order to avoid hazard these products must be installed according to these instructions.
IMPORTANT!
Please make this information available to the person responsible for installing the product as it could reduce your installation costs.
Correct installation is the responsibility of the customer. Ensure that the installer is properly qualified to install this oven.
Read these instructions carefully before installing or using this product.
and 238 pounds (108 Kg) for single oven models.
You will need a No.2 Phillips screwdriver to complete the installation of the oven into the cabinet. There should be 4 suitable wood screws with this installation kit (Part number 556075) and 4 spacers (Part number 545455).
A Fisher & Paykel CE901 cooktop can be installed above an OS301 single wall oven if a 3/8” (10mm) gap is provided between the top of the oven and the bottom of the cooktop.
6