US CA
18Setting the clock
Buttons
sets the timer
sets the cooking time
sets the stop time for automatic cooking
set the oven temperature / select Celsius or Fahrenheit
decreases the time and temperature
increases the time and temperature
sets the Self Clean time
starts the oven/starts the Self Clean cycle
Indicates AM 
12:00 A
Indicates PM
Clock display and control buttons
Illuminated symbols
If the display shows | It means that... | For more information | |
| flashing 12:00 | The clock needs to be set. | See instructions below. |
| steadily lit | The oven is set for automatic |
|
A | cooking. |
| |
| See section ‘Automatic cooking’ | ||
flashing and |
| ||
Automatic cooking has finished |
| ||
| beeping |
| |
|
|
| |
| steadily lit | The timer is set | See section ‘Using the electronic timer’ |
| steadily lit | The oven is heating up | See section ‘Using your oven’ |
To set the clock
When the power to the appliance is turned on or restored after a power failure 12:00 will flash in the display.
1Press 
and 
together - the display will stop flashing. The clock is now set for 12:00.
2 Press 
and 
together again to change the time. The display will flash
3 Rotate the temperature dial or press 
and 
to set the time. After a few minutes the display will be steadily lit, showing the time is set.
To change the time
1Press 
and 
together. The display will flash.
2Rotate the temperature dial or press 
and 
to set the time.
After a few seconds the display will remain steadily lit, showing the time is set.
Note: when the indicator light is at the top the time is set for am when the indicator light is at the bottom the time is set for pm.
Indicates AM | 12 |
Indicates PM |
