Fisher & Paykel OR60 Levelling the cooker, For safety reasons and to ensure adequate

16Installation instructions

MODELS Levelling the cooker

COOKTOP		Important!
		Using the supplied adjustable feet is MANDATORY.
		For safety reasons and to ensure adequate
		ventilation, the cooker chassis MUST NOT sit directly
GLASS		on the floor, a plinth, or other support surface.
		To fit the adjustable feet:
CERAMIC	1	Rest the rear of the cooker on a piece of
		packaging, exposing the base for fitting the feet.
	2	Screw the four feet to the cooker.
	3	Stand the cooker and level it by screwing or
		unscrewing the feet with an adjustable spanner.
		Use the supplied nuts if necessary. See Figs. 16a-
		16d.

Fig. 16d Levelling the cooker

Fixing the backguard

Before installing the cooker, assemble the backguard “B” .

The backguard “B” can be found packed at the rear of the cooker.

1Before assembling, remove any protective film/ adhesive tape.

2Remove the three screws “A” from the rear of the cooktop.

3Assemble the backguard as shown and fix it by screwing the three screws “A”.

Fig. 16a Fitting the

adjustable feet (supplied with the cooker in the feet kit)

0 + 8 mm

Fig. 16b Do not use the supplied nuts for height adjustments between 0 and 8 mm.

+ 8 mm + 15 mm

Fig. 16c Use the supplied nuts for height adjustments between 8 and 15 mm.

B

A

Fig. 17 Assembling the backguard