Installation instructions
3. Placing the refrigerator into the cabinet
11
3a Pull the power cord through the hole at the back of the cabinet or if the power socket is inside the cabinet, plug in the refrigerator before installing it into the cabinet.
■■Take care not to kink or bend the power cord as a damaged cord is a fire risk.
■■For safety reasons, only turn on the refrigerator once installation is complete.
3b Move the refrigerator into the cabinet and adjust its position to ensure that the clearance adjustment plate is attached to the bottom end of the cupboard side panel and the door gasket is attached to the front end of the cupboard side panel.
Top view
cross section
Kitchen cabinet
Refrigerator door
End surface of clearance
adjusting plate
Top attachment bracket
Front line of side surface
Fig.6 Installation of cabinet
3c Make sure the left and right side clearances between the refrigerator and cabinet are the same. 3d Fasten the side surfaces of the hinge with screws. Fix one screw to the top hinge and one screw
to the bottom hinge. Then fix all other screws to the remaining hinges.