![](/images/new-backgrounds/1076407/7640779x1.webp)
US CA
38
Troubleshooting
Problem | Possible causes | What to do |
Sides of cabinet are warm.
This is normal.
Warm area on central door seal.
This is normal.
Condensation on outside of refrigerator/ freezer.
Not unusual during periods of high humidity.
Wipe dry.
Condensation inside fresh food compartment.
Frequent or long door openings. | Minimize door openings. |
Door gasket leaking. | Check that gasket is sitting flat and |
| sealing tightly. |
|
|
Not unusual during periods of | Wipe dry. |
high humidity. |
|
|
|
Ice | Freezer door not closing tightly. | Move items in freezer so door can | |
inside freezer |
| close tightly. | |
compartment. |
| Check and clean door gasket seal. | |
|
| ||
Door handles out | With time and usage, movement | See Installation instructions – Stability | |
of alignment. | may occur. | instructions (pages 12 – 13). | |
Tray/bin does not | Packaging trapped. | Check to ensure no food or packaging is | |
slide in and out |
| trapped behind the tray/bin. | |
evenly. |
|
| |
Runners not extending fully. | Holding onto sides of tray/bin, extend the | ||
| |||
|
| runners fully by using a firm pull – this | |
|
| will reset the runner. | |
|
|
|