Fisher & Paykel RF540A Installation instructions, WARNING - connect to potable water supply only

Installation instructions

Important!

13

■■DO NOT use with water that is microbiologically unsafe or of unknown quality.

■■WARNING – connect to potable water supply only.

■■DO NOT install on line pressure above 827 kPa (119 psi) or below 150 kPa (22 psi).

■■DO NOT use on hot water supply (25°C (77°F) max).

■■DO NOT cut any length of tube shorter than 200 mm (8”).

■■DO NOT install near electrical wires or water pipes that will be in the path of drilling when selecting the location of the filter system.

■■DO NOT mount the filter in such a position that it will be struck by other items, such as wastebaskets, etc.

■■DO NOT install the filter or any water tubing in direct sunlight as prolonged exposure to light can weaken plastic components.

■■DO NOT install the filter in a location that is susceptible to freezing temperatures as damage to the filter housing could occur.

■■DO NOT screw the filter to the refrigerator.

■■DO NOT install the filter or any water tubing in high temperature areas eg in a ceiling cavity.

■■AVOID contamination of pipes during installation.

■■DO NOT use copper tubing. The plastic tubing supplied should always be used.

■■DO NOT continuously dispense water for a period longer than 2 minutes.