Fisher & Paykel RF522W Installation instructions, All connections must be checked for leaks

16

Installation instructions

Important!

■■All connections must be checked for leaks.

■■Ensure white 6 mm (¼”) tubing is routed away from sharp objects, sharp corners (beware of kinking tube as this will stop water flow), clear of the refrigerator unit compartment and not in a location where it can be squashed.

■■Ensure all push-fit connections are firmly pushed into place. The tube should be pushed in 16 mm (5/8”) before reaching the stop.

■■If tubing is removed at any point, re-cut the end and re-insert. Tubing must be fully inserted to avoid leaks.

■■To remove tube from connection points, turn off the isolating tap, push in the collet and gently pull tubing at the same time.

Diagram 9

Fig.9 Connection to water supply

The water filtration system is tested and certified by NSF International against NSF/ANSI Standard 53 for the reduction of Asbestos, Atrazine, Benzene, Cyst, Carbofuran, Lead, Lindane, Mercury, P-Dichlorobenzene, Toxaphene & Turbidity; against Standard NSF/ANSI 42 for the reduction of Chlorine Taste and Odour and Nominal Particulate Class I to a capacity of 2,838 Litres (750 gallons).