Fisher & Paykel RF610A Using your ice maker Ice & Water models only, Ice On/Off, First use

Using your ice maker (Ice & Water models only)

Ice On/Off

Your ice maker is designed to automatically dispense ice until it senses that the bin is full. So the more ice you use, the more it makes. It is even clever enough to sense when there is no bin in place to catch the ice and it will not dispense any ice.

31

First use

■■When you first turn your refrigerator on after installation, the

ice maker will be off. The light above the ICE ON/OFF icon will be off.

■■To turn your ice maker on press the button. The light above the ICE ON/OFF icon will be illuminated when the ice maker is on.

■■Press and hold , and together for 4 seconds then close the door(s). The ice tray will flip. Force another cycle. The ice tray will flip and spill the water into the ice bin. Empty water and replace bin.

Note: the ice tray will flip only once doors are closed.

■■If the bin is full of ice, inserted incorrectly or if all bins are removed, the ice maker will not operate. When the bin is inserted correctly the scoop will be on the right hand side of the bin for models E402B, E442B, E522B, RF522W and RF522A and at the front of the bin for models RF610A and RF540A (refer to Fig.24).

■■Once your ice maker is in operation, discard the first 3 harvests of ice (8 ice cubes are produced per harvest). This will flush away any impurities in the water line and ensure that you get the best quality ice. We recommend that you also do this after vacations or extended periods of not using ice.

■■We recommend that you turn the ice maker off if:

–The water supply is to be off for several hours, or

–The ice storage bin is to be removed for a period of time, or

–You are going on holiday/vacation.

Fig.23 Turning ice maker on

E402B, E442B, E522B RF522A and RF522W

RF610A/RF540A

Fig.24 Ice storage bin and scoop in correct position