Fisher & Paykel RF610A, RF522A, RF522W, RF540A installation instructions Installation instructions

Installation instructions

15

11Attach double sided foam to the back of the water filter head as shown in Diagram 5. Write the date to be replaced on the filter (date installed + 6 months). Remove double sided foam backing and attach filter to the desired position as located in step 10 (refer to previous page).

12Run the 6 mm (¼”) tubing to the back of the refrigerator ensuring there is enough tubing to pull the refrigerator out for service.

13Connect tubing into the water (solenoid) valve located on the right hand side of the unit (compressor) compartment as shown in Diagram 7. Beware of hot pipes.

14Pull gently on tubing to ensure it is locked in as shown in Diagram 8.

15The completed installation should look like Diagram 9 on page 16.

Diagram 5

Fig.7 Double sided foam attachment

Diagram 7 Diagram 8

Fig.8 Waterline connection to refrigerator

Diagram 6

16Turn isolating tap on and check that all connections are dry and free of drips.

17Coil water line tubing behind the refrigerator. Push the refrigerator into place being careful not to kink or squash the water line running into the water (solenoid) valve.

18Read and follow pages 16 and 17 before using your ice and water system.