Fisher & Paykel RF540A, RF610A Using the display options, Changing the Measured Fill units

Using the display options

Measured Fill

21

One useful feature of your water dispenser is it’s ability to dispense a pre-measured amount of water. This comes in handy when cooking or preparing drinks.

Press the button to highlight the screen and again to cycle through the preset quantities.

Fig.20 Metric display

Fig.21 US display

Push the dispensing pad to receive the pre-selected quantity of chilled water. The units will count up to confirm operation.

If you stop dispensing part way through your pre-selected quantity the dispenser will remember the remaining quantity to be dispensed for a short time. Simply continue by pressing the pad.

The and buttons can be used to increase or decrease the pre-set measurements in 25 ml, (1 oz) increments, to a maximum of 1 L (1 qt).

Changing the Measured Fill units

The pre-set measurements can be displayed in US imperial or metric units.

The unit setting can be changed by pressing the button to scroll to the screen and pressing the and buttons until the desired units are displayed. To return to the Measured Fill option, press the button.