The unique AquaSmart™ wash 17
The AquaSmart™ washer has two modes of washing, High Efficiency and Conventional. Both
modes start the same way, with a Detergent Activating wash.
EN
Detergent Activating wash |
|
AquaSmart™ fills the tub at the selected water temperature, with |
|
just enough water so the clothes are saturated. This small amount |
|
of sudsy water flows through the clothes, up a specially designed |
|
portal and back onto the clothes in a waterfall effect. This |
|
thoroughly dissolves and activates the detergent. | Fig.10 Detergent Activating wash |
High Efficiency mode
In the High Efficiency mode the AquaSmart™ then fills with just enough water to lift the clothes off the low profile agitator so when it rotates, the clothes gently roll over each other. This wash uses similar quantities of water to most Front Loaders and so, not only do you get the benefits of water savings but the higher detergent concentrations give you optimum soil removal.
Fig.11 High Efficiency wash
Conventional mode |
|
The Conventional mode is the immersion wash all Top Loader users |
|
are familiar with. After the Detergent Activating wash the AquaSmart™ |
|
fills with cooler water until the clothes are submerged, and gently |
|
turns the clothes over. We recommend this mode when the dilution |
|
effect of water can solve or prevent common wash problems. For |
|
example, when dye or color run can be a problem, or when washing |
|
sandy towels. The BED SHEETS cycle uses the Conventional mode. | Fig.12 Conventional wash |
|
Some cycles can be used in both modes, whilst others work in only one.
Regular
Bed Sheets
Whites
Colors
Heavy Duty
Delicate
Easy Iron
Bulky
High Efficiency | Conventional |
–
–
–
–
–
These two wash modes mean that your AquaSmart™ washer gives you the best of both worlds, to suit any laundry situation.
