TURN ON PROCEDURE
1.Set your controls as follows:
GROUND = 10
DISC = 0 for normal use in target ID mode. (Set DISC to “Auto tune” for deep search,
SENSITIVITY = 10
MODE =ENHANCE VOLUME = OFF
2.Hold the search coil waist high, away from any nearby metal.
3.Turn the VOLUME control to 10. A brief bell tone is normal when you turn the VOLUME control on.
If you’re in the Auto tune Mode, you’ll hear an audio “threshold” hum. Lower the SENSITIVITY control until you can just barely hear it.
4.If you’re wearing headphones, reduce the headphone volume controls to a comfortable level when the search coil is passed over a large, shallow target.
GROUND BALANCING
When your
If you have difficulty ground balancing, try reducing your sensitivity level or moving to another spot just in case you are over a buried piece of metal. In some areas of high ground mineralization you may not be able to use the “pushbutton” method.
7