Manuals / Brands / Computer Equipment / Network Card / Fisher / Computer Equipment / Network Card

Fisher PJ-Net Set, SELECT, SELECT, Network setting, Password setting, How to enter the numbers with point buttons, The default password is set “0000” as no password

1 114

Download 114 pages, 4.15 Mb

Chapter 2 Installation

Password setting

A password can be set to restrict access to the setting pages of the projector using the web browser. The default password is set “0000” as no password.

Network setting

1 Use the projector’s menu and select the Network setting icon on the menu.

2 Select the Network setting sub icon from the submenu, and then press SELECT button once. Check that the mode is “On”.

3 Select the Password sub icon and then press SELECT button once.

*The setting window appears. The numbers on the display indicates the current password.

4 Enter your desired number by using the point buttons on the projector or remote control handset, and then select Set and press SELECT button.

*The password setting window disappears and the network unit begins restarting. It takes about 40 seconds. Do not turn off the mains switch during this period.

*The password can be entered by using the screen 10-key pallet (☞ P.21).

How to enter the numbers with point buttons

To move the selection and change the value, use the point buttons (de78) on the projector or on the remote control handset.

The point buttons 78are used to select the column.The point buttons de are used to change the numbers up and down.

✐Password setting must be done when you connect the projector to the network. This setting is carried out through the projector’s menu and also it can be set through the network using the web browser. For further information please refer to item “Initial Setting/Password set- ting” (☞ p.30).

✐Valid characters for password are only 4 digits numeric numbers 0 to 9. The number “0000” means no password set.

✐This password is not to restrict the use of the projector. This password is to set the security against the use of the projector through the network.

20

Contents

OWNER’S MANUAL Compliances Contents Contents Chapter 5 Network Viewer & Capture Using the Network Capture function Create the available data [File Converter] Making a program file [Program Editor] Chapter Preparation Features Web Management function E-MailAlert function Multi-controlfunction Internet Intranet Automatic On/Off using Clock function Control port ready for external equipment via network Operating Environment Before use Expression/Abbreviation Use of this manual Trademarks *The contents of this manual are subject to change without notice Software License Agreement Installation Flow of installation 1Function of the Network Unit (☞ p.15) 2Installation and network configuration (☞ p.16-21) 3Installation of the software (☞ p.22-24) zName and function of each part xInstallation and Network configuration Connection of LAN cable 1 Disconnect the AC plug from the projec- tor 2 Connect the UTP strait cable to the LAN port on the Network Unit 3 Connect the UTP strait cable to the hub Network configuration Confirmation of the network menu Configure the network This example explains how to set the following configuration The default network configuration is set as follows 2 Configuration for IP Address/ Sub net/ Gateway*/DNS How to enter the numbers 3 Restart the Network Unit Completing of installation Password setting The default password is set “0000” as no password 1 Use the projector’s menu and select the Network setting icon on the menu 3 Select the Password sub icon and then press SELECT button once How to enter the numbers with point buttons How to enter the numbers with the screen 10-keypallet Select a column with a red frame by using the point buttons 78 Press SELECT button. The screen 10-keypallet appears on the screen cInstalling the software Installed software The following 3 software are installed on your computer ●Network Capture: ●Network Viewer (File Converter 1): ●Network Viewer (Program Editor) : File Converter 2 Installation SetupDrv.exe Install Installed software and places ●Network Viewer (File Converter 2): Basic Setting and Operation Login the setting page of the projector zMain setting page in the Graphic Mode display xMain setting page in the Text Mode display Initial Settings 2 Password Setting Enter the password onto the text box and click Set button 3 Temperature unit setting Centigrade : indicated with ºC Fahrenheit : indicated with ºK 4 Date/Time Setting Network Configuration E-mailSetting 2 Registering and deleting E-mailaddresses 3 Option selection for sending alert message 4 Condition selection for sending alert message *The length of message should be less than 256 characters *The lamp use time can be set 0 to 9999 hours Examples: Type and contents of alert mail The following are examples of received messages ●When the internal power circuit is failed: ●When the life span of lamp is reached: ●When the lamp use time reaches preselect lamp use time: Controlling the Projector Power on/off the projector Check the status of projector Control the projector Input PC Adjustment Save a Set Save to Memo 3 Register by clicking Set button To restore the adjustments, click Reset button System Adjustment Available selection when the VIDEO/S-VIDEOinput Available selection when the Y, Cb/Pb, Cr/Pr input Image Adjustment Save an image adjustment value Load an image mode Screen Sound Setting The confirmation window How to set the Timer 1 Set a day or date To set the timer event at same time everyday The selectable days are as follows: To set the timer event on specified date 2 Set a time 3 Select an event “ON” or “OFF” 4 Register an event Check the Timer events Getting the current time Notes on timer setting When the timer event Cancel the timer Service Save Actual Adjustment of the projector you use 1 Adjust and set the controls 2 Select the Save page Save Check the Save items Load a control set Control the projector's menu Make a memo Network Viewer & Capture Using the Network Capture function Network Capture Search 5 Set the quality of the image Quality: Selects from High, Mid, Low 6 Click OK button to close the setting window [2] Control by the web browser Network Capture Start 3 Click Stop button to stop capturing Registering the computers Advanced using example 1 Start capturing of the computer PC1 by using the projector 3 Select a desired file and double click with the remote control 4 Start the presentation PC1 PC2 Create the available data [File Converter] Converting procedure 1 Select a folder in which the image files are stored by the explorer window 2 Click “Convert a folder” when converting all the files in a selected folder Setting of conversion mode Change Conversion type: Other menu items View: Preview size: Sets preview mode with the Large, Medium, Small [2] How to use the Network Viewer (File Converter 2) Conversion procedure 1 Open a document with the individual software Print Preferences Making a program file [Program Editor] 4 Click New button 5 Enter a program name and click Add button 7 Click Register button to register the folder list into the program 8 Click “Close box” to quit the Program Editor The limitation of the Program file Using the Network Viewer function main menu, click Network Viewer to display the setting page Network Viewer Select input mode to “Network” previously 5 Auto Display setting and control page [3] The display status is indicated on the text area *Error type Caution 6 Program New Registration [4] 1.Click on “New Registration” linked text 2.Enter a program name and click Select button 3.On the Folder Selection window After finishing, click Close button 7 Program Confirmation & Change [4] 1.Click on “Confirmation & Change” linked text From “Program Name” To add a new folder which has new images into selected pro- gram, click 4. After editing the program con [2]Control by the projector Select input mode to “Network” previously 1 Display the menu bar on the projected screen Page Controlling the Multi-Projectors Multi-Control Register IP address and projector name Click on to display the registration page. Type the IP address and projector name if required and the click button Exclude/Add/Delete a projector Status If the Control Load and apply the setting value Control multi-projectorsat the same time Use of Serial Port Serial Port setting the serial controller Setting fro controlling the projector from the computer through the LAN port Control Examples PC2 PJ2 PJ1 PC5 Use of Telnet When the word “Hello” is replied, login has been succeeded -The extra projector will be turned on To disconnect the communication, type “Ctrl” key and “]” key at the same time Control the projector with Telnet Appendix:A Examples of Connection Examples of connection The gateway (Router) installed in the network Connecting the projector (PJ01) to the control computer (PC05) via the gateway Meeting Room Network Group: Web browser setting Examples: OS/Browsers Proxy setting Internet Options Connection LAN Settings - Using proxy server Netscape Navigator JavaScript Setting Advanced/Proxies Manual proxy configuration HTTP Proxy Select the item Direct connection to the Internet in the proxy setting window Product specification Port Specification Appendix:B FAQ FAQ QHow can I restrict access from the computer QHow can I install several projectors equipped with the Network Unit QHow many projectors can I control with multi-controlfunction QStartingpointer. the Network Capture slow the response speed of the mouse Password/Login QWhat should I do when I forget the password Operation QWhy can't I change the controls in the setting page with web browser Qplay?Why does it sometimes take a lot of time to complete the page dis How many numbers of the QWhy am I not receiving E-mailalert messages Others QCan I develop a driver to control external serial equipment QCan I control the projector by using the telnet application QCan I update the firmware of the Network Unit QWhat are the rules for IP address assignment QWhat is the MAC address assigned to the Network Unit Network Capture QWhy doesn’t the computer screen appear on the projected screen Network Viewer QImages from the file server don’t appear on the screen QI cannot make a new program file QWhat kind of image formats can I convert QSometime I have the white frame images converted by the File Converter Page SANYO Electric Co. Ltd