Fisher PJ-Net Search, Internet, Intranet, the computer, Network Capture, About Image Quality, [1] Control by the computer, 5 Set the quality of the image

Network Capture

4 Click Search button to list up the available IP address assign to the projector and select desired IP address you use, or you can enter the IP address manually if you know that IP address.

5 Set the quality of the image.Quality: Selects from High, Mid, Low

Image Magnification: If checked, the screen image size of the computer is automatically adjusted to the projector’s screen size.

6 Click OK button to close the setting window.About Image Quality

Quality : Quality mode of the captured image shows following JPEG compression mode.;

High : JPEG low compression mode

Mid : JPEG medium compression mode

Low : JPEG high compression mode

[1] Control by the computer

PC1	Project this screen		* Start capturing from
	image with PJ2.
		Capture	the computer.

* PC privided with the Network Capture.

	Internet	PJ2	PJ1
PC3 PC4
	Intranet
		PC5

Select input mode to the “Network” previously.1 Click Network Capture icon on the task bar.2 Click “Start” on the popup menu.The captured screen image of the computer will appear on the projected screen.

* If the error message appears, check “Parameter Determination” described on the previous page.

3 To stop capturing, click “Stop” on the popup menu.

In the standby In capturing

Icon on the task bar

Network Unit

OWNER’S MANUAL

ENGLISH

61