Fisher PJ-Net Start, Network Capture, [2] Control by the web browser, 3 Click Stop button to stop capturing, Select input mode to the “Network” previously

Chapter 5 Network Viewer & Capture

[2] Control by the web browser

PC1	PC2
			Capture
* PC privided with the Network Capture.		Internet	PJ2	PJ1
PC3	PC4
		Intranet
			PC5	Project a screen
				image of PC1 with
				PJ2.

*Start capturing of the PC1 from the PC5.

Select input mode to the “Network” previously.

1 Access to the control page on the projector by using the web browser. From the main menu, click Network Capture to display the setting page (☞ p.26).

2 Select the computer number to connect from the pull-down menu button of “Connecting PC” and click Start button.

*The IP address of the connecting PC should be registered previously (☞ p.63).

*Set the Capture Port and Mouse Port to match to the com- puter’s port number you intend to connect (☞ p.61).

*Set “On”on the “Mouse Display” when you want to display the mouse cursor on the screen.

3 Click Stop button to stop capturing.

*You can use the capture function by using the web browser or the projector if the Network Capture software is installed into the computer correctly and its icon stays on the task bar.

62