Manuals / Brands / Computer Equipment / Network Card / Fisher / Computer Equipment / Network Card

Fisher PJ-Net Examples: Type and contents of alert mail, ●When the internal temperature is too high:, *The lamp use time can be set 0 to 9999 hours

1 114

Download 114 pages, 4.15 Mb

E-mail Setting

4 Condition selection for sending alert message

Check the condition items under which alert messages will be sent and click Set button.

A free message can be sent when the lamp use time reaches the preselected lamp use time.

Check this condition and enter a setting time. Type a free message on “Attached Message” text box and the click Set button.

*The length of message should be less than 256 characters.*The lamp use time can be set 0 to 9999 hours.

If you check “When a connection error occurs during an auto play.”, the projector sends an alert message when the error occurs while the projector projects images automatically by using the Network Viewer function (☞ p.72). For the detail of error contents, please see item “Auto display setting and control page[3]”. (☞ p.74)

Examples: Type and contents of alert mail

When the projector has an abnormality, the following alert messages are sent to the registered E-mail address according to your selected condition. Administrator or user can take an efficient action quickly by receiving this message. This is very useful to maintain and service the projector.

The following are examples of received messages.●When the internal temperature is too high:

TITLE: Message from projector 01-03-2003 00:59

Projector Model Name: XP50/55

TCP/IP: 192.168.1.201 Projector Name: myProjector

It sends you following message.

*The Projector lamp is turned off, because internal projector temperature is too high.

Wait Temperature Warning Indicator turned off,turn the Projector on again. If the Indicator continues to flash,check the air filter for dust accumulation.

[A]36.5 Degree [B] 46.5 Degree [C] 58.2 degree Temperature of Sensor C is too high.

ENGLISH

✐The Network Unit let users know the information which thermal sensor [A], [B] or [C] inside the projector detected the abnormal temperature risen and so the projector was turned off. Please refer to item “Check the status of projector” for the location of the sensors [A], [B] and [C], and temperature (☞ p.39). Also see the owner's manual of the projector for further details.

Network Unit 35

OWNER’S MANUAL

Contents

OWNER’S MANUAL Compliances Contents Contents Chapter 5 Network Viewer & Capture Using the Network Capture function Create the available data [File Converter] Making a program file [Program Editor] Chapter Preparation Features Web Management function E-MailAlert function Multi-controlfunction Internet Intranet Automatic On/Off using Clock function Control port ready for external equipment via network Operating Environment Before use Expression/Abbreviation Use of this manual Trademarks *The contents of this manual are subject to change without notice Software License Agreement Installation Flow of installation 1Function of the Network Unit (☞ p.15) 2Installation and network configuration (☞ p.16-21) 3Installation of the software (☞ p.22-24) zName and function of each part xInstallation and Network configuration Connection of LAN cable 1 Disconnect the AC plug from the projec- tor 2 Connect the UTP strait cable to the LAN port on the Network Unit 3 Connect the UTP strait cable to the hub Network configuration Confirmation of the network menu Configure the network This example explains how to set the following configuration The default network configuration is set as follows 2 Configuration for IP Address/ Sub net/ Gateway*/DNS How to enter the numbers 3 Restart the Network Unit Completing of installation Password setting The default password is set “0000” as no password 1 Use the projector’s menu and select the Network setting icon on the menu 3 Select the Password sub icon and then press SELECT button once How to enter the numbers with point buttons How to enter the numbers with the screen 10-keypallet Select a column with a red frame by using the point buttons 78 Press SELECT button. The screen 10-keypallet appears on the screen cInstalling the software Installed software The following 3 software are installed on your computer ●Network Capture: ●Network Viewer (File Converter 1): ●Network Viewer (Program Editor) : File Converter 2 Installation SetupDrv.exe Install Installed software and places ●Network Viewer (File Converter 2): Basic Setting and Operation Login the setting page of the projector zMain setting page in the Graphic Mode display xMain setting page in the Text Mode display Initial Settings 2 Password Setting Enter the password onto the text box and click Set button 3 Temperature unit setting Centigrade : indicated with ºC Fahrenheit : indicated with ºK 4 Date/Time Setting Network Configuration E-mailSetting 2 Registering and deleting E-mailaddresses 3 Option selection for sending alert message 4 Condition selection for sending alert message *The length of message should be less than 256 characters *The lamp use time can be set 0 to 9999 hours Examples: Type and contents of alert mail The following are examples of received messages ●When the internal power circuit is failed: ●When the life span of lamp is reached: ●When the lamp use time reaches preselect lamp use time: Controlling the Projector Power on/off the projector Check the status of projector Control the projector Input PC Adjustment Save a Set Save to Memo 3 Register by clicking Set button To restore the adjustments, click Reset button System Adjustment Available selection when the VIDEO/S-VIDEOinput Available selection when the Y, Cb/Pb, Cr/Pr input Image Adjustment Save an image adjustment value Load an image mode Screen Sound Setting The confirmation window How to set the Timer 1 Set a day or date To set the timer event at same time everyday The selectable days are as follows: To set the timer event on specified date 2 Set a time 3 Select an event “ON” or “OFF” 4 Register an event Check the Timer events Getting the current time Notes on timer setting When the timer event Cancel the timer Service Save Actual Adjustment of the projector you use 1 Adjust and set the controls 2 Select the Save page Save Check the Save items Load a control set Control the projector's menu Make a memo Network Viewer & Capture Using the Network Capture function Network Capture Search 5 Set the quality of the image Quality: Selects from High, Mid, Low 6 Click OK button to close the setting window [2] Control by the web browser Network Capture Start 3 Click Stop button to stop capturing Registering the computers Advanced using example 1 Start capturing of the computer PC1 by using the projector 3 Select a desired file and double click with the remote control 4 Start the presentation PC1 PC2 Create the available data [File Converter] Converting procedure 1 Select a folder in which the image files are stored by the explorer window 2 Click “Convert a folder” when converting all the files in a selected folder Setting of conversion mode Change Conversion type: Other menu items View: Preview size: Sets preview mode with the Large, Medium, Small [2] How to use the Network Viewer (File Converter 2) Conversion procedure 1 Open a document with the individual software Print Preferences Making a program file [Program Editor] 4 Click New button 5 Enter a program name and click Add button 7 Click Register button to register the folder list into the program 8 Click “Close box” to quit the Program Editor The limitation of the Program file Using the Network Viewer function main menu, click Network Viewer to display the setting page Network Viewer Select input mode to “Network” previously 5 Auto Display setting and control page [3] The display status is indicated on the text area *Error type Caution 6 Program New Registration [4] 1.Click on “New Registration” linked text 2.Enter a program name and click Select button 3.On the Folder Selection window After finishing, click Close button 7 Program Confirmation & Change [4] 1.Click on “Confirmation & Change” linked text From “Program Name” To add a new folder which has new images into selected pro- gram, click 4. After editing the program con [2]Control by the projector Select input mode to “Network” previously 1 Display the menu bar on the projected screen Page Controlling the Multi-Projectors Multi-Control Register IP address and projector name Click on to display the registration page. Type the IP address and projector name if required and the click button Exclude/Add/Delete a projector Status If the Control Load and apply the setting value Control multi-projectorsat the same time Use of Serial Port Serial Port setting the serial controller Setting fro controlling the projector from the computer through the LAN port Control Examples PC2 PJ2 PJ1 PC5 Use of Telnet When the word “Hello” is replied, login has been succeeded -The extra projector will be turned on To disconnect the communication, type “Ctrl” key and “]” key at the same time Control the projector with Telnet Appendix:A Examples of Connection Examples of connection The gateway (Router) installed in the network Connecting the projector (PJ01) to the control computer (PC05) via the gateway Meeting Room Network Group: Web browser setting Examples: OS/Browsers Proxy setting Internet Options Connection LAN Settings - Using proxy server Netscape Navigator JavaScript Setting Advanced/Proxies Manual proxy configuration HTTP Proxy Select the item Direct connection to the Internet in the proxy setting window Product specification Port Specification Appendix:B FAQ FAQ QHow can I restrict access from the computer QHow can I install several projectors equipped with the Network Unit QHow many projectors can I control with multi-controlfunction QStartingpointer. the Network Capture slow the response speed of the mouse Password/Login QWhat should I do when I forget the password Operation QWhy can't I change the controls in the setting page with web browser Qplay?Why does it sometimes take a lot of time to complete the page dis How many numbers of the QWhy am I not receiving E-mailalert messages Others QCan I develop a driver to control external serial equipment QCan I control the projector by using the telnet application QCan I update the firmware of the Network Unit QWhat are the rules for IP address assignment QWhat is the MAC address assigned to the Network Unit Network Capture QWhy doesn’t the computer screen appear on the projected screen Network Viewer QImages from the file server don’t appear on the screen QI cannot make a new program file QWhat kind of image formats can I convert QSometime I have the white frame images converted by the File Converter Page SANYO Electric Co. Ltd