BEFORE OPERATION

Remote Control Batteries Installation

1

Remove the battery

2

Slide the batteries into

3

Replace the compartment

 

compartment lid.

 

the compartment.

 

lid.

Press the lid downward and slide it.

Slide the lid upward.

For correct polarity (+ and –), be sure the battery terminals are in contact with the pins in the compartment.

To insure safe operation, please observe the following precautions :

●Use (2) AA type alkaline batteries.

●Replace two batteries at the same time.

●Do not use a new battery with a used battery.

●Avoid contact with water or liquid.

●Do not drop the remote control unit.

●If batteries have leaked on the remote control, carefully wipe the case clean and load new batteries.

Operating Range of the Remote Control

Point the remote control toward the projector (Receiver Window) whenever pressing the buttons. Maximum operating range for the remote control is about 16.4’ (5m) and 60° front and rear of the projector

16.4'

16.4'

(5 m)

(5 m)

60°

60°

17