COMPUTER MODE

Auto Image Function

The Auto Image function is provided to automatically adjust Fine sync., Total dots, and Picture Position for most computers.

1

 

 

Press the MENU button and the ON-SCREEN MENU will appear.

 

 

 

Press the POINT LEFT/RIGHT buttons to select AUTO IMAGE

 

 

 

and press the SELECT button.

 

 

 

 

 

Another dialog box AUTO IMAGE Menu will appear.

2

 

 

Move the arrow to an item that you want to adjust by pressing the

 

 

POINT UP/DOWN button. Change the setting On or Off by

 

 

 

pressing the SELECT button.

 

 

 

Fine sync

 

 

 

Adjust the picture as necessary to eliminate flicker from

 

 

 

 

 

the display. This item can be adjusted manually. (Refer

 

 

 

 

 

to page 28.)

 

 

 

 

 

 

Total Dots

 

 

 

The number of the total dots in one horizontal period.

 

 

 

 

 

This item can be adjusted manually. (Refer to page 28.)

 

 

 

 

 

 

 

 

 

Position

 

Adjustment of the position of the image. This item can

3

 

 

 

 

be adjusted manually. (Refer to page 30.)

 

 

 

 

 

 

 

 

 

 

 

 

Move the arrow to "Go!" and press the SELECT button to start the

 

 

Auto Image function.

 

 

 

This adjustment can be executed by pressing AUTO IMAGE

 

 

 

button on the Top Control and the Remote Control.

 

 

 

 

 

 

NOTE : The Fine sync., Total dots, and Picture Position of some computers may not be fully adjusted with the Auto Image Function. In that case, manually adjustments is required to make fine image. (Refer to PICTURE IMAGE ADJUSTMENT on page 28 to adjust "Fine sync." or "Total dots" and PICTURE POSITION ADJUSTMENT on page 30 to adjust Picture Position.)

Move the arrow to the item and then press the SELECT button.

It starts the adjustment on the item set to "On".

It terminates the PIC-

TURE IMAGE ADJUSTMENT Menu.

Normal Function

The normal picture level is preset on this projector by the factory and

 

can be restored anytime by pressing the NORMAL button (located on

 

the Top Control or on the Remote Control Units). The "Normal" display

Normal

will be displayed on the screen for a few seconds.

29