BEFORE OPERATION

TOP CONTROLS AND INDICATORS
LAMP INDICATOR

This indicator is lit in dim when the projector is turned on. And the light is brightened when the projector is in standby mode.

LAMP REPLACE INDICATOR

This indicator turns to yellow when the life of the projection lamp draws to an end.

(Refer to P43.)

WARNING TEMP. INDICATOR

This indicator flashes red when internal projector temperature is too high.

(Refer to P42.)

READY INDICATOR

This indicator is lit in green when the projector is ready to be turned on.

POWER ON–OFF BUTTON
MENU BUTTON

Used to active or terminate the MENU operation.

(Refer to P19.)

AUTO IMAGE BUTTON

Used to operate AUTO IMAGE function.

(Refer to P29.)

LAMP REPLACE

WARNING TEMP.

LAMP

READY

MENU

ON–OFF

SELECT

AUTO IMAGE

NORMAL

Used to turn the projector on or off. (Refer to P22.)

POINT BUTTONS

Used to move the pointer. (Refer to P19.)

SELECT BUTTON
FOCUS BUTTON

 

Used to select focus adjust.

FOCUS

(Refer to P23.)

 

PAGE

ZOOM

PAGE BUTTONS

 

+

MODE VOLUME

–

Used to execute the item selected or to adjust the values in certain items on the MAIN MENU DISPLAY.

NORMAL BUTTON

Used to reset to normal picture adjustment preset by factory. (Refer to P29 and 32.)

Used to move next/previous page of the data in the memory card plugged into PC CARD SLOT. These buttons are used to stop or resume AUTO-PLAY function. Page buttons are activated in MCI mode.

(Refer to P34.)

ZOOM BUTTON

Used to select zoom adjust. (Refer to P23.)

MODE BUTTON

Used to select input source. (Computer, Video and MCI) (Refer to P25 and 31.)

VOLUME BUTTONS

Used to adjust volume. (Refer to P24.)

18