Fisher PLC-XU10N CURSOR FUNCTION, ADJUSTING THE IMAGE, PICTURE FREEZE / NO SHOW FUNCTION, NORMAL mode, FREEZE mode, NO SHOW mode, BASIC OPERATION, ZOOM Adjustment

BASIC OPERATION

ADJUSTING THE IMAGE

	ZOOM Adjustment
1	Press ZOOM button on the Top Control or the Remote Control to
	turn into the ZOOM mode.
2	button.Adjust the size of the image by pressing POINT UP/DOWN
	Press UP button to have the image larger, and press DOWN
	button to have the smaller.

ZOOM

The message disappears after 4 seconds.

	FOCUS Adjustment
1	Press FOCUS button on the Top Control or the Remote Control to
	turn into the FOCUS mode.
2	button.Adjust the focus of the image by pressing POINT UP or DOWN

FOCUS

The message disappears after 4 seconds.

PICTURE FREEZE / NO SHOW FUNCTION

Press the FREEZE / NO SHOW button on the Remote Control Unit to turn the picture remained on-screen or turn the picture into black image. These function is cancelled when the FREEZE / NO SHOW button is pressed again or any other function button is pressed.

NORMAL modeFREEZE mode NO SHOW mode

CURSOR FUNCTION

This projector can display a cursor by pressing cursor button on the

Remote Control. The cursor can be controlled with the POINT buttons.

To terminate the Cursor Function, press CURSOR button again.

NOTE : The cursor settings set with the “Media Card Imager” is not available in this projector.

Cursor

23