Computer Input

Input Source Selection (RGB : Computer 1(Analog) / Computer 2 )

Direct Operation

Choose either Computer 1(Analog) or Computer 2 by pressing the INPUT button on the top control or press the COMPUTER button on the remote control.

Before using these buttons, correct input source should be selected through Menu operation as described below.

Top Control

 

 

INPUT button

 

 

 

 

 

INPUT button

 

 

POWER

WARNING LA

Computer 1

 

 

MENU

INPUT

AU

 

 

(Analog/Digital)

 

ON

 

 

-

 

 

 

 

OFF

 

 

 

 

 

 

SELECT

 

 

Computer 2

✳

 

 

 

 

 

 

 

 

Video

 

 

 

 

 

Wired

 

Remote Control

 

 

 

 

 

 

 

COMPUTER button

 

 

 

 

 

COMPUTER button

 

 

 

 

Computer 1

 

 

 

 

 

(Analog/Digital)

 

 

 

 

 

Computer 2

✳

✳See Note at the bottom of this page.

Menu Operation

1 Press the MENU button to display the On-Screen Menu. Press the Point 7 8 buttons to move the red framed pointer to the Input Menu icon.

2 Press the Point ed buttons to move the red arrow pointer to either Computer 1(Analog) or Computer 2, and then press the SELECT button.

3 When selecting Computer 1(Analog), RGB input source will be selected directly.

When selecting Computer 2, the Source Select Menu will appear. Move the pointer to RGB and then press the SELECT button.

✔Note:

•Computer 2 is not displayed when the COMPUTER IN 2 / COMPONENT IN / MONITOR OUT terminal is set as Monitor out. (p50)

•Computer 2 (COMPUTER IN 2 / COMPONENT IN /MONITOR OUT) can accept only RGB signal.

•Wired, Wireless, Memory Viewer are for the Network function. See owner's manual (Additional Vol.) and owner's manual of Memory viewer (optionally available).

Input Menu

Input Menu icon

 

Move the pointer (red arrow) to Computer 1 (Analog) and press the SELECT button.

Input Menu icon

Input Menu

Move the pointer (red arrow) to Computer 2 and press the SELECT button.

Computer

2

Move the pointer (red arrow) to RGB.

Input Computer

29