Computer Input
Input Source Selection (RGB(PC digital), RGB(AV HDCP))

Direct Operation

Choose Computer 1(Digital) by pressing the INPUT button on the top control or press the COMPUTER button on the remote control.

Before using these buttons, correct input source should be selected through Menu operation as described below.

Menu Operation

1 Press the MENU button to display the On-Screen Menu. Press the Point 7 8 buttons to move the red framed pointer to the Input Menu icon.

2 Press the Point ed buttons to move the red arrow pointer to Computer 1(Digital), and then press the SELECT button.

3 After the Source Select Menu appeared for Computer 1(Digital), move the pointer to RGB (PC digital) or RGB (AV HDCP) and then press the SELECT button.

✔Note:

•Computer 2 is not displayed when the COMPUTER IN 2 / COMPONENT IN / MONITOR OUT terminal is set as Monitor out. (p50)

•Computer 2 (COMPUTER IN 2 / COMPONENT IN / MONITOR OUT) can accept only RGB signal.

•HDCP (High-bandwidth Digital Content Protection) is a system for protecting digital entertainment content delivered by DVI (Digital Visual Interface) from being copied. The specification of HDCP is decided and controlled by Digital Content Protection, LLC. Should the specification be changed, this projector may not display the digital content protected by HDCP.

•Wired, Wireless, Memory Viewer are for the Network function. See owner's manual (Additional Vol.) and owner's manual of Memory viewer (optionally available).

Top Control

 

 

INPUT button

 

 

 

 

 

INPUT button

 

 

POWER

WARNING LA

Computer 1

 

 

 

INPUT

AU

 

 

MENU

(Analog/Digital)

 

ON

 

 

-

 

 

 

 

OFF

 

 

 

 

 

 

SELECT

 

 

Computer 2

✳

 

 

 

 

Video

 

 

 

 

 

Wired

 

Remote Control

 

 

 

 

 

 

 

COMPUTER button

 

 

 

 

 

COMPUTER button

 

 

 

 

Computer 1

 

 

 

 

 

(Analog/Digital)

 

 

 

 

 

Computer 2

✳

✳See Note at the bottom of this page.

Input Menu icon

Input Menu

Move the pointer (red arrow) to Computer 1 (Digital) and press the SELECT button.

Computer

1

Move the pointer to the source that you want to select and press the SELECT button.

30