Video Input
Input Source Selection (Component, RGB Scart 21-pin)

Direct Operation

Choose Computer 2 by pressing the INPUT button on the top control or press the COMPUTER button on the remote

Top Control

INPUT button

POWER WARNING LAMP R

INPUT button

control.

Before using these buttons, correct input source should be selected through Menu operation as described below.

ON

MENU

INPUT

AUTO

-

 

 

SE

OFF

 

 

 

 

SELECT

 

 

-

 

 

+

 

 

 

Remote Control

Computer 1 (Analog/Digital)

Computer 2 ✳

Video

Wired

Menu Operation

1

Press the MENU button to display the On-Screen

 

Menu. Press the Point 7 8 buttons to move the red

 

framed pointer to the Input Menu icon.

2

Press the Point ed buttons to move the red arrow

 

pointer to Computer 2 and then press the SELECT

 

button.

3

After the Source Select Menu appeared for Computer

 

2, move the pointer to Component or RGB(Scart) and

 

then press the SELECT button.

 

 

When the input source is coming from

 

Component

 

 

video equipment connected to the

 

 

 

 

COMPUTER IN 2 / COMPONENT IN /

 

 

MONITOR OUT terminal with a

 

 

Component-VGA Cable, select Component.

COMPUTER button

COMPUTER button

Computer 1

(Analog/Digital)

Computer 2 ✳

✳See Note at the bottom of this page.

Input Menu

Input Menu icon

 

Move the pointer (red arrow) to Computer 1 and press the SELECT button.

Computer

2

RGB (Scart) When the input source is coming from video equipment connected to the

COMPUTER IN 2 / COMPONENT IN / MONITOR OUT terminal with a Scart-VGA Cable, select RGB (Scart).

✔Note:

•When Monitor out is selected in the Terminal function (p50), Computer 2 is not displayed.

•Wired, Wireless, Memory Viewer are for the Network function. See owner's manual (Additional Vol.) and owner's manual of Memory viewer (optionally available).

Source Select Menu

Move the pointer to Component or RGB(Scart) and press the SELECT button.

40