Video Input
Input Source Selection (Video,Direct Operation
Choose Video by pressing the INPUT button on the top control or the VIDEO button on the remote control.
Top Control
INPUT button
POWER WARNING LAMP R | INPUT button |
Before using these buttons, correct input source should be selected through menu operation as described below.
ON | MENU | INPUT | AUTO |
S | |||
- |
|
| ET |
OFF |
|
| |
|
|
| |
| SELECT |
|
|
|
|
| + |
-
V
Computer 1 (Analog/Digital)
Computer 2 ✳
Video
Wired
✳See Note at the bottom of this page.
Menu Operation
1 | Press the MENU button to display the | ||
| Menu. Press the Point 7 8 buttons to move the red | ||
| framed pointer to the Input Menu icon. | ||
2 | Press the Point ed buttons to move the red arrow | ||
| pointer to Video and then press the SELECT button to | ||
| display the Source Select Menu . | ||
3 | Move the pointer to the source that you want to select | ||
| and then press the SELECT button. | ||
|
| When selecting Auto, the projector | |
| Auto | ||
| automatically detects incoming video signal, and | ||
|
| ||
|
| adjusts itself to optimize its performance. The | |
|
| projector selects connection in the following | |
|
| order: | |
|
| 1. | |
|
| 2. Video | |
|
| When video input signal is connected to the | |
| Video | ||
| VIDEO jack, select Video. | ||
|
| ||
|
| When video input signal is connected to the S- | |
VIDEO jack, select | |||
|
| ||
✔Note:
•When Monitor out is selected in the Terminal function (p50), Computer 2 is not displayed.
•Wired, Wireless, Memory Viewer are for the Network function. See owner's manual (Additional Vol.) and owner's manual of Memory viewer (optionally available).
Remote Control
VIDEO button
Input Menu icon
Input Menu
Move the pointer to Video and press the SELECT button.
VIDEO
Source Select Menu (VIDEO)
Move the pointer to the source that you want to select and press the SELECT button.
Input Video
39