Fisher-Price 79701 owner manual If a pre-drilled hole does not exist, you will

Tether Anchor Installation

Van, Hatchback, Station

Wagon, Sport Utility Vehicle

				- 40 LBS.)
		Bolt		(22
		Anchor
				UP
	Hole is
		4"		AND
	behind
		4"
	vehicle seat
		Car
	and still		Seat
	accessible by
		Center		YEAR
	tether strap.		Line
		Washer
	Lock Nut
				1
4B	If a pre-drilled hole does not exist, you will			POSITION
	have to drill a 5/16" hole. (Be sure to wear
	appropriate eye protection when drilling.)
	Make sure the hole is behind the vehicle seat
	and still accessible by the tether strap; and			FORWARD-FACING
	no more than 4" from the center line of the
	Safe Embrace® Convertible Car Seat.
5B	Insert the bolt through the anchor.
6B	Insert the end of the bolt into the hole inside
	your vehicle.
7B	From the outside or underside of your vehi-
	cle, attach the washer and lock nut to the
	end of the bolt. While holding the bolt tight
	with a wrench, tighten the lock nut securely
	with another wrench. If the drilled hole is on
	the floor of your vehicle, use a silicone caulk
	to seal out water and exhaust fumes.

42