Fisher-Price 79701 owner manual Tether Anchor Installation

Tether Anchor

Installation

1Choose an acceptable vehicle seating loca- tion for your car seat. Follow the instructions,

“Selecting a Vehicle Seating Location for Your Car Seat”, pages 9 and 10, for general infor- mation on choosing a vehicle seating location. To determine the seating location that provides a tight fit for your car seat, pre-install the car seat in your vehicle. Follow the instructions, “Installing Your Car Seat in a Vehicle”, pages 51-57, steps 1-5 and 9.

2You also need to choose an acceptable

location for the tether anchor. Make sure the location is:

•through solid metal,

•11/4" away from any edge or large hole (speaker holes, defroster vent holes, etc.),

•clear of wires, fuel or brake lines, fuel tank and spare tire,

•accessible to allow the attachment of a washer and nut,

•NOT a removable panel, luggage cover, spare tire cover or any screw-on panel.

3Determine which type of vehicle you have: 2-door or 4-door car (see page 41); van,

station wagon, hatchback, sport utility vehicle (see page 42); or pick-up truck (see page 43).

Note: Installation of the tether anchor may require two adults.

IMPORTANT!

•Use the tether strap only when using your car seat in the forward-facing position (22-40 lbs.).

•Use the tether strap in addition to your vehicle belt system to install your car seat in your vehicle.

FORWARD-FACING POSITION 1 YEAR AND UP (22 - 40 LBS.)

40