Tether Anchor Installation
Pick-Up Truck
Washer | Lock Nut |
| |
| Distance from |
| top of vehicle |
| seat and hole |
Anchor | is at least 8". |
Bolt
3" 3"
Car Seat
Center Line
4C If a 
have to drill a 5/16" hole. (Be sure to wear appropriate eye protection when drilling.) Make sure the hole is at least 8" from the top of the vehicle seat and no more than 3"
from the center line of the Safe Embrace® Convertible Car Seat.
5C
Insert the bolt through the anchor.
6C Insert the end of the bolt into the hole 
inside your vehicle.
7C From the outside of your vehicle, attach 
the washer and lock nut to the end of the
bolt. While holding the bolt tight with a wrench, tighten the lock nut securely with another wrench. Use a silicone caulk around the drilled hole to seal out water and exhaust fumes.
43
