Bootable CD-ROM Is Not Detected

Check the following:

!Is the BIOS set to allow the CD-ROM to be the first bootable device? Check your BIOS Setup (F2) configuration.

Problems with the Network

Diagnostics pass, but the connection fails:

!Make sure the network cable is securely attached.

The controller stopped working when an add-in adapter was installed:

!Make sure the cable is connected to the port from the onboard network controller.

!Make sure the other adapter supports shared interrupts.

!Try reseating the add-in adapter.

The add-in adapter stopped working without apparent cause.

!Try reseating the adapter first; then try a different slot if necessary.

!The network driver files may be corrupt or deleted. Delete and then reinstall the drivers.

!Run the diagnostics.

Plug and Play Installation Tips

Certain drivers may require interrupts that are not shared with other PCI drivers. The BIOS Setup Utility can be used to adjust the interrupt numbers for PCI devices. For certain drivers, it may be necessary to alter settings so that interrupts are not shared.

5-14 Problem Solving

Page 146
Image 146
NEC 120Lg manual Problems with the Network, Plug and Play Installation Tips, Bootable CD-ROM Is Not Detected