| |
| EPP |
| ECP |
EPP Version | 1.7 |
| 1.9 |
ECP Mode DMA | 0 |
Channel | 1 |
| 2 |
| 3 |
Legacy USB | Disabled |
Support | Keyboard Only |
| Auto |
| Keyboard and |
| Mouse |
PS/2 Mouse | Disabled |
Support | Enabled |
Selects the version for Enhanced Parallel Port (EPP) mode.
Selects the DMA channel for Extended Capabilities Port (ECP) mode.
Disables or enables support for USB keyboards and mice. Set to Enable for use with a
Specify whether the mouse is enabled or disabled.
Memory Configuration Submenu
| Choices or | Description | Your Setting |
Feature | Display Only |
|
|
Extended | 1 MB |
Memory Test | 1 KB |
| |
| Disabled |
Extended memory test options run during POST.
1MB: Tests every
1KB: Tests every
Disabled: Initializes memory.
DIMM Bank #1 | Installed |
(DIMM1A, | Disabled |
DIMM1B) | Not Installed |
DIMM Bank #2 | Installed |
(DIMM2A, | Disabled |
DIMM2B) | Not Installed |
Memory Disabled
Retest Enabled
Indicates the current memory status. "Normal" indicates the normal status, "Error" indicates a memory error, and "None" indicates no DIMM installed (view only). Bank #1 indicates DIMMs in DIMM sockets #1A and #1B.
(Memory is interleaved so that two DIMMs are used per bank.)
Indicates the current memory status. "Normal" indicates the normal status, "Error" indicates a memory error, and "None" indicates no DIMM installed (view only). Bank #2 indicates DIMMs in DIMM sockets #2A and #2B.
(Memory is interleaved so that two DIMMs are used per bank.)
Clears memory error information and retests all DIMMs on the next system boot. This option will be automatically reset to [Disabled] on the next system boot.
Advanced Chipset Control Submenu
| Choices or | Description | Your |
Feature | Display Only |
| Setting |
Wake on Ring | Disabled | Enables or disables the remote |
|
| Enabled |
| |
| Disabled | (modem). |
|
Wake on LAN | Enables or disables the remote |
| |
| Enabled |
|
