NEC 120Lg manual Table B-1. Device Drivers, Installing and Configuring Windows

Overview

This appendix contains supplemental instructions needed to install and configure hardware and software used with the Microsoft Windows® 2000 Operating System. This information is intended to supplement the more detailed procedural documents available from Microsoft. This information is not intended to be the central source of installation and configuration information for your system. Read this entire chapter along with Microsoft's Windows® 2000 Setup procedures before starting the installation process.

Note: Read the System Release Notes for the latest system information before attempting to install Windows 2000 Operating System on your system.

Device Drivers

The drivers required for the devices listed in Table B-1below are located on the EXPRESSBUILDER CD that is included with your system. To create the required diskettes, perform “Tools” on the EXPRESSBUILDER CD.

!CAUTION

When creating the required diskettes from the EXPRESSBUILDER CD make sure you use the drivers required for the devices on your specific system.

Always read the information in the release notes or inserts, included with any options for they supersede the information in this guide.

Table B-1. Device Drivers

Supported Device Required Driver Media*

SCSI Controllers HALs

Windows 2000 OEM Diskette* (If applicable)

System Board

Windows 2000 Update Module**

*Diskette generated from the EXPRESSBUILDER CDROM

**Run this application from the EXPRESSBUILDER CDROM; diskette not required

B-2 Installing and Configuring Windows 2000