4-30 Disassembly and Reassembly
Hot-Swap Power Supply
Your server may contain a modular hot-swap power supply like the one shown
in Figure 4-26. The addition of a second hot-swap power supply makes your
system so that it has redundant power and can be operated continuously without
interruption if either of the power supplies malfunction.
Installation
1. Prepare your system for upgrade. See Preparing Your System for
Disassembly and Reassembly describes earlier in this chapter.
2. Loosen a screw securing the blank cover to remove the cover from the
chassis. Remove the cover and save it for future use. See Figure 4-26.
Figure 4-26. Loosening the Blank Cover Retaining Screw
3. Press down the locking tab of the power supply handle and open the handle.
See Figure 4-27.
1
2
Figure 4-27. Preparing the Power Supply for Installation