Canon B180C, B160 manual Location, Power supply

KLocation

•Place the fax on a flat, stable, vibration-free surface that is strong enough to support its weight (approx. 5.1 kg).

•Place the fax in a cool, dry, clean, well ventilated place.

– Make sure the area is free from dust.

– Make sure the location is not affected by extreme temperature changes, and always stays between 10° and 32.5°C.

– Make sure the area’s relative humidity is always between 20% and 85%.

•Keep the fax away from direct sunlight as this can damage it. If you have to place it near a window, install heavy curtains or blinds.

•Do not use the fax near water. Make sure that no wet or humid objects come into contact with the fax.

•Do not use or store the fax outdoors.

•Do not install the fax near devices that contain magnets or generate magnetic fields, such as speakers.

•If possible, place the fax near an existing telephone outlet to avoid the expense of installing a new one.

•Place the fax near a standard 200-240 V AC power outlet.

•To ensure reliable operation of the fax and to protect it from overheating (which can cause it to operate abnormally and create a fire risk), do not block the exhaust vent and never block or cover any openings on the fax by placing it on a bed, sofa, rug, or other similar surface. Do not place the fax in a cupboard or built-in installation, or near a radiator or other heat source unless proper ventilation is provided. Install the fax approximately 10 cm away from walls and other equipment. For the dimensions of the fax, see p. S-1.

•Do not place the fax on the edge of a desk so as to prevent received documents from falling onto the floor.

•Do not stack boxes or furniture around the power outlet. Keep the area free so you can reach the outlet quickly. If you notice anything unusual (smoke, strange odours, noises) around the fax, unplug it immediately. Contact your local authorised Canon dealer or the Canon Help Desk.

•Do not allow anything to rest on the power cord, and do not place the fax where the cord will be walked on. Make sure the cord is not knotted or kinked.

KPower supply

•During electrical storms, disconnect the power cord from the power outlet. (Please note that any documents stored in the fax’s memory will be deleted when you unplug the fax.)

•Whenever you unplug the fax, wait at least five seconds before you plug it in again.

•If dust accumulates around the plug of the power cord when it is connected to a power outlet, unplug the fax and wipe the plug with a clean, dry cloth.

This product emits low level magnetic flux. If you use a cardiac pacemaker and feel abnormalities, please move away from this product and consult your doctor.

ix