
Preparing to send a document
3 Use [u] or [d] to select SCAN CONTRAST.
SCAN CONTRAST
Press [Set].
Set
STANDARD
4 Use [u] or [d] to adjust the scanning contrast.
You can select STANDARD, DARKER or LIGHTER.
Press [Set].
Set
DARKER
OFFHOOK ALARM
6
5 Press [Stop]. | Stop |
|
Setting ends and the fax returns to standby mode.
Sending methods ___________________________
KMemory sending (see p. 6-5)
Each time you send a document, the fax quickly scans the document into memory and then sends the document from memory after it has dialled the receiving party. This is called memory sending. Memory sending allows you to remove the original document immediately after scanning.
If MEMORY FULL appears on the LCD when scanning the document, the rest of the document is not scanned into memory but is sent directly to the receiving party.
KManual sending (see p. 6-6)
If you would like to speak with the receiving party before sending a document to them, use manual sending. When sending manually, you dial, converse normally and then press [Start] to begin sending.
For manual sending, you need to have the optional handset, a telephone or an extension phone connected.
SENDING DOCUMENTS