NEC 120Lg manual Security Menu

Wake on PME	Disabled
	Enabled
Wake on RTC	Disabled
Alarm	Enabled

Enables or disables the remote power- on features by PCI device (PCI Power Management Enable wake up event) installed to the PCI riser C.

Enables or disables the remote power- on features using RTC Alarm features.

Security Menu

Note: Enabling the Supervisor Password field requires a password for entering Setup. The passwords are not case sensitive.

	Choices or	Description	Your Setting
Feature	Display Only

User Password is	Installed
	Not Installed
Administrator	Installed
Password is	Not Installed
Set Admin	Up to 7
Password	alphanumeric
	characters
Set User	Up to 7
Password	alphanumeric
	characters
Password On Boot	Disabled
	Enabled
Fixed Disk Boot	None
Sector	Write Protect
Secure Mode	1 minute
Timer	2 minutes
	5 minutes
	10 minutes
	20 minutes
	60 minutes
	120 minutes
Security Hot Key	L
CTRL-ALT-	Z
Secure Mode Boot	Disabled
	Enabled
Video Blanking	[Disabled]
	Enabled
Power Switch	Disabled
Inhibit	Enabled
Diskette Write	[Disabled]
Protect	Enabled

Indicates whether the user password is set (view only).

Indicates whether the administrator password is set (view only).

Press Enter to display the administrator password entry screen. With the administrator password, all SETUP menus are available for access. This option is available only when you log into the SETUP utility with the administrator password.

Press Enter to display the user password entry screen. With a user password, only certain menus are accessible. This option is available only if the Administrator Password is specified.

Specify whether to request a password entry at boot-up. Administrator password setup is required.

Prevents data from being written to IDE hard disks. The server does not support IDE hard disks.

Set the period from no input from the keyboard or mouse to the point at which the system enters into the secure mode. If this item is set to "Disabled," the system does not enter the secure mode.

Specify the hot key to invoke secure mode features. Pressing the assigned key along with Ctrl and Alt invoke secure mode. This option is enabled when User Password is set.

Specify whether the system boots in secure mode. This option is enabled when User Password is set.

Specify whether to turn off the monitor when secure mode is activated.

Enables or disables the POWER switch. If "Enabled" is selected, power-off with the POWER switch becomes unavailable after OS boot-up. (Forced shut down also becomes unavailable. Forced shut down is a feature to shut down by pressing the POWER switch for at least four seconds.)

Controls access to the floppy disk drive during the secure mode.

Configuring Your System 3-11